Comparación de la distribución de tamaño de bolas de alúmina en dos unidades de molienda de cemento blanco utilizando la función swebrec

Ismael Eduardo Rivera-Madrid, Marlon Rincón-Fulla, Adriana M. Osorio-Correa, Lina M. Chica-Osorio, M. Oswaldo Bustamante-Rúa, Juan María Menéndez-Aguado

Resultado de la investigación: Contribución a una revistaArtículo

Resumen

The results of characterizing the alumina ball size distribution in two mills of a crushing and grinding plant are shown. The mills were unloaded and the ball charge was screened in order to establish the ball size distribution. For both mills, the balls retained during the unloading were compared to the balls retained at the beginning of the process, and additionally, they were compared to the results obtained by the Swebrec adjusted distribution model. In both cases, the experimental data have had a good fit with this model. This practice is important in order to establish the best ball charge at the beginning of the operation and the ball recharge in the steady state.

Idioma originalEspañol
PublicaciónDYNA (Colombia)
Volumen86
N.º209
DOI
EstadoPublicada - 1 abr 2019

Huella dactilar

Cements
Alumina
Grinding (comminution)
Crushing
Unloading

Palabras clave

  • Ball size distribution
  • Grinding
  • Size distribution model

Citar esto

Rivera-Madrid, Ismael Eduardo ; Rincón-Fulla, Marlon ; Osorio-Correa, Adriana M. ; Chica-Osorio, Lina M. ; Bustamante-Rúa, M. Oswaldo ; Menéndez-Aguado, Juan María. / Comparación de la distribución de tamaño de bolas de alúmina en dos unidades de molienda de cemento blanco utilizando la función swebrec. En: DYNA (Colombia). 2019 ; Vol. 86, N.º 209.
@article{182b739faeb046eab1205905b4aab7f8,
title = "Comparaci{\'o}n de la distribuci{\'o}n de tama{\~n}o de bolas de al{\'u}mina en dos unidades de molienda de cemento blanco utilizando la funci{\'o}n swebrec",
abstract = "The results of characterizing the alumina ball size distribution in two mills of a crushing and grinding plant are shown. The mills were unloaded and the ball charge was screened in order to establish the ball size distribution. For both mills, the balls retained during the unloading were compared to the balls retained at the beginning of the process, and additionally, they were compared to the results obtained by the Swebrec adjusted distribution model. In both cases, the experimental data have had a good fit with this model. This practice is important in order to establish the best ball charge at the beginning of the operation and the ball recharge in the steady state.",
keywords = "Ball size distribution, Grinding, Size distribution model",
author = "Rivera-Madrid, {Ismael Eduardo} and Marlon Rinc{\'o}n-Fulla and Osorio-Correa, {Adriana M.} and Chica-Osorio, {Lina M.} and Bustamante-R{\'u}a, {M. Oswaldo} and Men{\'e}ndez-Aguado, {Juan Mar{\'i}a}",
year = "2019",
month = "4",
day = "1",
doi = "10.15446/dyna.v86n209.73970",
language = "Espa{\~n}ol",
volume = "86",
journal = "DYNA (Colombia)",
issn = "0012-7353",
publisher = "Universidad Nacional de Colombia",
number = "209",

}

Comparación de la distribución de tamaño de bolas de alúmina en dos unidades de molienda de cemento blanco utilizando la función swebrec. / Rivera-Madrid, Ismael Eduardo; Rincón-Fulla, Marlon; Osorio-Correa, Adriana M.; Chica-Osorio, Lina M.; Bustamante-Rúa, M. Oswaldo; Menéndez-Aguado, Juan María.

En: DYNA (Colombia), Vol. 86, N.º 209, 01.04.2019.

Resultado de la investigación: Contribución a una revistaArtículo

TY - JOUR

T1 - Comparación de la distribución de tamaño de bolas de alúmina en dos unidades de molienda de cemento blanco utilizando la función swebrec

AU - Rivera-Madrid, Ismael Eduardo

AU - Rincón-Fulla, Marlon

AU - Osorio-Correa, Adriana M.

AU - Chica-Osorio, Lina M.

AU - Bustamante-Rúa, M. Oswaldo

AU - Menéndez-Aguado, Juan María

PY - 2019/4/1

Y1 - 2019/4/1

N2 - The results of characterizing the alumina ball size distribution in two mills of a crushing and grinding plant are shown. The mills were unloaded and the ball charge was screened in order to establish the ball size distribution. For both mills, the balls retained during the unloading were compared to the balls retained at the beginning of the process, and additionally, they were compared to the results obtained by the Swebrec adjusted distribution model. In both cases, the experimental data have had a good fit with this model. This practice is important in order to establish the best ball charge at the beginning of the operation and the ball recharge in the steady state.

AB - The results of characterizing the alumina ball size distribution in two mills of a crushing and grinding plant are shown. The mills were unloaded and the ball charge was screened in order to establish the ball size distribution. For both mills, the balls retained during the unloading were compared to the balls retained at the beginning of the process, and additionally, they were compared to the results obtained by the Swebrec adjusted distribution model. In both cases, the experimental data have had a good fit with this model. This practice is important in order to establish the best ball charge at the beginning of the operation and the ball recharge in the steady state.

KW - Ball size distribution

KW - Grinding

KW - Size distribution model

UR - http://www.scopus.com/inward/record.url?scp=85074398270&partnerID=8YFLogxK

U2 - 10.15446/dyna.v86n209.73970

DO - 10.15446/dyna.v86n209.73970

M3 - Artículo

AN - SCOPUS:85074398270

VL - 86

JO - DYNA (Colombia)

JF - DYNA (Colombia)

SN - 0012-7353

IS - 209

ER -